Very low framerate when creating DCP (SOLVED)

Anything and everything to do with DCP-o-matic.
Post Reply
KrisSP
Posts: 19
Joined: Tue Aug 01, 2017 8:49 am

Re: Very low framerate when creating DCP

Post by KrisSP »

Okay, so finally got around to look more into this – and finally got it working!

I got the Windows license upgraded from Windows 7 Home to Professional, but still only saw the six cores in the task managers. Tried checking the BIOS again, and it showed both processors (like before) and HyperThreading was enabled (like before).

Finally I ran msconfig.exe and had a look there, it still showed max 6 cores under advanced options. But I noticed that under the Boot tab, it was set to "Selective startup". I switched it to "Normal startup", and a couple of reboots later, I had all 24 cores up and running!

Thanks for all your help!
Top
Carsten
Posts: 2663
Joined: Tue Apr 15, 2014 9:11 pm
Location: Germany

Re: Very low framerate when creating DCP (SOLVED)

Post by Carsten »

Good!

- Carsten
Top
Post Reply

Return to “DCP-o-matic”