DCP-o-matic

Hello,

I'm trying to crerate a DCP from a DVD copy of a film (720x576), but i'm not able to fit the screen neither in height or in width.
It's a 1:33 film.
It just create a black frame all around the image.

Is this inevitable?

Thanks for your help

Can you try "scale to" 1.33:1 and then use the flat container? That should work. You'll get black to the left and right but that's just where your image isn't

Yes, i tried that already.
I supposed the World just doesn't want to adapt to my Will

thank you very much

What does DCP-o-matic say at the bottom of the video tab? Can we see a screen shot? Also, click the "outline content" checkbox and let's see how that looks.

How can I attach images here? can you explain, sorry for this newbie thing...

I think you can drag and drop into your message, or use the "attachments" tab underneath the message editor.

4:3 movies on DVDs can be 'real' 4:3, or pillarboxed in 16:9. Without seeing a screenshot (with 'outline content' activated), we can't tell what it is.

- Carsten

screenshots

The stuff inside the red box is in your content, so you have some black pixels in your original images. Adjust the crop settings so that the red rectangle surrounds the actual image area. Then you should be all sorted. It looks like it might not be quite 4:3 though. Maybe it's 1.66:1 within 4:3, or something?

Hmm, that screen seems to have scaling and padding already applied. I usually prefer to have a look at the raw image. But as far as DCP-o-matic recognized the DVD format/container as 1.33 with 1.07 display aspect ratio, it should be okay to analyze.

Whatever, looks as if this is a 1.66 format within a native 4:3 DVD 'container' (hence the black bars on top). The lean black bars on the sides were typical for telecines at the time, safe frame for CRT TVs or so. The effective aspect ratio is 1.60:1 (open in image editor and measure active pixels, then divide, e.g. 746/463)

You should crop away as much as possible from top and bottom symmetrically until the image fills the screen vertically, and leave black bars at the sides as they come out. Choose 'No Stretch', as that deals best with 'strange' aspect ratios not covered by the remaining options. 1.66 would stretch the image slightly horizontally. Not much, but we can do better.

My crop numbers may not exactly match your situation, as the display aspect ratio of the still I worked on is square (770/576)- while the DVD image internally is 1.07:1 (thus 720/576 covering the same content).
BUT - when set correctly, the aspect ratio in parentheses behind ''Cropped to' and 'Scaled to' should be close to 1.60 if you try to recreate.

Scaling non-square pixel and letter/pillarboxed content is probably the most difficult to understand.

I see there is a small bug in DCP-o-matic when creating the DCNC name - it uses the source native aspect ratio (1.33:1) for the container signaling, so, it creates 'F-133' - it should take the aspect ratio after cropping - you need to set the DCNC/ISDCF name manually to F-160 or F-166 to indicate the proper aspect ratio to the projectionist.

- Carsten