Page 1 of 1

2.15.72 64-bit Error

Posted: Sun May 17, 2020 7:00 am
by scozz76
2.15.72 64-bit
See attached JPG
Reinstalling didn't fix the problem. Rolling back to 2.15.71 did fix the problem.

Re: 2.15.72 64-bit Error

Posted: Sun May 17, 2020 7:30 am
by carl
Oh dear :( I'll fix that now, thanks very much for the heads-up!

Re: 2.15.72 64-bit Error

Posted: Sun May 17, 2020 11:27 am
by carl
Should be better in 2.15.73.

Re: 2.15.72 64-bit Error

Posted: Mon May 18, 2020 5:43 am
by scozz76
Ahhhh, that's better :D

Re: 2.15.72 64-bit Error

Posted: Mon May 18, 2020 5:54 am
by scozz76
Oops, I tell a lie.

When importing a file or opening a saved session.

15:19:19: can't open file 'C:\Program Files\DCP-o-matic 2\link.png' (error 0: the operation completed successfully.)
15:19:19: Failed to load image from file "C:\Program Files\DCP-o-matic 2\link.png".
15:19:19: can't open file 'C:\Program Files\DCP-o-matic 2\link.png' (error 0: the operation completed successfully.)
15:19:19: Failed to load image from file "C:\Program Files\DCP-o-matic 2\link.png".

Re: 2.15.72 64-bit Error

Posted: Mon May 18, 2020 6:32 am
by carl
:oops: will fix...

Re: 2.15.72 64-bit Error

Posted: Mon May 18, 2020 8:05 pm
by carl
Hopefully this time!

Re: 2.15.72 64-bit Error

Posted: Tue May 19, 2020 1:30 am
by scozz76
So far, so good.
What happened to 2.15.74? :)

Re: 2.15.72 64-bit Error

Posted: Tue May 19, 2020 1:35 am
by Carsten
Carl is faster than his shadow...

Re: 2.15.72 64-bit Error

Posted: Tue May 19, 2020 6:48 am
by carl
.74 had the same problem on Linux :shock: