DCP -File could not be opened for writing.

Anything and everything to do with DCP-o-matic.
Paula C.
Posts: 7
Joined: Tue Jul 27, 2021 3:43 pm

DCP -File could not be opened for writing.

Post by Paula C. »

Error message in DCP-o-matic after creating the DCP (28 min source file, mp4) The file (created DCP ... SHR-1-25_F178-De-en_Germany ... SMPTE O ... mfx ) could not be opened for writing.
DCP folder File was created in the DCP-o-matic folder, but the corresponding folder is empty
„The file (created DCP ... SHR-1-25_F178-De-en_Germany ... SMPTE O ... mfx ) could not be opened for writing“
DCP-o-matic Version: 2.14.54 git 89b5c8f65a

??
Carsten
Posts: 2648
Joined: Tue Apr 15, 2014 9:11 pm
Location: Germany

Re: DCP -File could not be opened for writing.

Post by Carsten »

This is usually a problem with storage space. Either the disc was becoming full, or you used e.g. a FAT32 partition which has a maximum file size of 4GB.

Theoretically, in certain environments, could also be caused by a disc quota setting.

Check your project location and disk sizes.

Sometimes, external USB discs can also operate unstably, causing the disc to be ejected, or have similar issues.

- Carsten
Last edited by Carsten on Sun Aug 01, 2021 11:52 pm, edited 3 times in total.
Paula C.
Posts: 7
Joined: Tue Jul 27, 2021 3:43 pm

Re: DCP -File could not be opened for writing.

Post by Paula C. »

Thanks, Carsten, for the feedback! But it doesn't seem to be due to the storage space. There are still over 400 GB on my C:\ hard drive. The video is 28 minutes long and 20 GB as CPD (without the now burnt-in subtitles).
I have now tried again, but I got the same error message again??
Paula C.
Posts: 7
Joined: Tue Jul 27, 2021 3:43 pm

Re: DCP -File could not be opened for writing.

Post by Paula C. »

Fehlermeldung. DCP kann nicht geschrieben werden.jpg
Fehlermeldung. DCP kann nicht geschrieben werden.jpg (607.57 KiB) Viewed 3275 times
Carsten
Posts: 2648
Joined: Tue Apr 15, 2014 9:11 pm
Location: Germany

Re: DCP -File could not be opened for writing.

Post by Carsten »

Okay, I can only guess here that the path to the project and thus assets is too complex (too long, spaces and dots...).

Maybe you can try a shorter pathname, like C:/Paula/ (you may need to set write access to this location first).

I can also see that your source file has a complex long name that may cause an issue here.

Actually I am a bit drunk in the moment, so, not sure, but I think the common Windows path length limit is 260, and your path name to the MXF is more than 260 chars. I may be able to re-check tomorrow when I'm sober again. ;-)

Or better try to place the project folder and source file on your desktop, like C:/Users/Paula Georges/Desktop/Gedicht/
Paula C.
Posts: 7
Joined: Tue Jul 27, 2021 3:43 pm

Re: DCP -File could not be opened for writing.

Post by Paula C. »

OK, drunken Carsten ;)) thanks much for your sober, prescient tips! :)
I will try it that way and report if it worked.
Greetings from Frankfurt
Paula C.
Posts: 7
Joined: Tue Jul 27, 2021 3:43 pm

Re: DCP -File could not be opened for writing.

Post by Paula C. »

Cheers, Carsten ! It worked!!
Wasn't sure if I could close everything after DCP-o-maitc reported that video was converted -after approx. 1 hour 40 min. Nothing more happened under 'Check content for project changes'. 0:00 hours. But it said ok.
5 screenshot erstelltes DCP in DCP o matic.jpg
5 screenshot erstelltes DCP in DCP o matic.jpg (207.32 KiB) Viewed 3228 times
6 erstelltes DCP auf DCP o matic jpg.jpg
6 erstelltes DCP auf DCP o matic jpg.jpg (212.05 KiB) Viewed 3228 times
I was able to play the DCP with the player.So everything seems to be ok.
Thank you for your kind help!
Are you a member of the DCP-o-matic developer or administrator team?
Great open source!
Best regards!
Paula
Carsten
Posts: 2648
Joined: Tue Apr 15, 2014 9:11 pm
Location: Germany

Re: DCP -File could not be opened for writing.

Post by Carsten »

Carl does all the programming work. I'm just a happy forum alcoholic ;-)

Grüße aus Köln!

Cheers - Carsten
Paula C.
Posts: 7
Joined: Tue Jul 27, 2021 3:43 pm

Re: DCP -File could not be opened for writing.

Post by Paula C. »

ah ok!! Vielen Dank nach Köln!!! :lol:
Carsten
Posts: 2648
Joined: Tue Apr 15, 2014 9:11 pm
Location: Germany

Re: DCP -File could not be opened for writing.

Post by Carsten »

You are right, though, that DCP-o-matic should probably end it's long working with a little bit more 'BOOM' instead of just ending silently.

There is an option to enable a message box, though:


Bildschirmfoto 2021-08-05 um 15.42.36.png
Bildschirmfoto 2021-08-05 um 15.42.36.png (66.54 KiB) Viewed 3208 times
Bildschirmfoto 2021-08-05 um 15.45.17.png
Bildschirmfoto 2021-08-05 um 15.45.17.png (96.17 KiB) Viewed 3208 times
Post Reply