Still DCP's have no assetmap

Anything and everything to do with DCP-o-matic.
Post Reply
cineko
Posts: 7
Joined: Sat Jul 24, 2021 3:51 pm

Still DCP's have no assetmap

Post by cineko »

It seems that DCPomatic when it produces 10 second DCP's from still images is only producing 2 x MXF files in the output package and no assetmap or other files. As a result my TMS does not 'see' these files and I can't ingest them. DCP's produced from video clips are fine.
carl
Site Admin
Posts: 2338
Joined: Thu Nov 14, 2013 2:53 pm

Re: Still DCP's have no assetmap

Post by carl »

If there's no other files it suggests something went wrong during the DCP creation. Can you attach the "log" file from inside your project, or send it to carl@dcpomatic.com ?
cineko
Posts: 7
Joined: Sat Jul 24, 2021 3:51 pm

Re: Still DCP's have no assetmap

Post by cineko »

Thanks Carl, where do I find the log file please?
carl
Site Admin
Posts: 2338
Joined: Thu Nov 14, 2013 2:53 pm

Re: Still DCP's have no assetmap

Post by carl »

In the same place you found your DCP, in a file called "log"
Carsten
Posts: 2648
Joined: Tue Apr 15, 2014 9:11 pm
Location: Germany

Re: Still DCP's have no assetmap

Post by Carsten »

Must be specific to your installation. I create loads of 10s stills from single PNGs every week and all our DCPs are complete and ingest fine.

- Carsten
IoannisSyrogiannis
Posts: 128
Joined: Mon Nov 13, 2017 8:40 pm

Re: Still DCP's have no assetmap

Post by IoannisSyrogiannis »

My guess would be either checksum issues (on the computer running DCP-o-matic) or copy issues (if it copies to the TMS automatically).
The latter seems to me more probable, just because the original poster says that the TMS does not 'see' the packages and doesn't know where the project folder with the logs resides.
Post Reply