Cinema with 2 projector TDL KDM

[igit]

Hello,
We have a cinema with 2 server Dolby DSS200 and 2 projectors - its not IMAX
And for this cinema need create KDM with TDL (trusted device list)
How i can add second server certificate to Screen ?

2022-09-01 162147.png (13.04 KiB) Viewed 1723 times

in Other trusted device a can't add thumbprint or certificate

[carl]

Hi, there's supposed to be an add button next to the trusted device list

A fix is coming soon.

[Carsten]

That button went missing with 2.16.10, it seems.

[carl]

These buttons should be back in 2.16.23.

[IoannisSyrogiannis]

It's nice to have the function back live and working, but there is something I don't get.
As a workaround, wouldn't it be possible to make two "screens", "Screen 01a" and "Screen 01b" and make KDMs for "both"?

And I only mention here a workaround, not because I am in favor of workarounds instead of properly functioning software, but because I was under the impression that the "Other trusted devices" field was initially meant there for populating in the case where someone wants to issue a KDM for the projector (that, I have yet to see used) or an Atmos audio processor.
Two Dolby DSS200 servers mean that it's not a stack one-over-another or side-by-side 3D implementation.

[gunnar]

It's nice to have the function back live and working, but there is something I don't get.
As a workaround, wouldn't it be possible to make two "screens", "Screen 01a" and "Screen 01b" and make KDMs for "both"?

And I only mention here a workaround, not because I am in favor of workarounds instead of properly functioning software, but because I was under the impression that the "Other trusted devices" field was initially meant there for populating in the case where someone wants to issue a KDM for the projector (that, I have yet to see used) or an Atmos audio processor.
Two Dolby DSS200 servers mean that it's not a stack one-over-another or side-by-side 3D implementation.

You are right. This will work exactly the same way if you generate it as two separate screens so that workaround is perfectly valid.
And since you mention an Atmos processor. You only have to generate KDM for it if you are going to screen an atmos DCP in atmos.
The processor won’t need a kdm if you are only screening the regular 5.1/7.1 sound from the atmos DCP.

[auta]

Hi Carl !
I'm have problem with generate KDM for two projctors system
I added trusted diveces but, i'm not recive right thumbprint in generate KDM

I added in attachment right and wrong screenshots with thumbprint, and certificates

I tested v 2.16.47 and 2.16.51
This in right Thumbprint

thumbprint_right.PNG (22.87 KiB) Viewed 1338 times

This is wrong Thumbprint

thumbprint_wrong.PNG (24.39 KiB) Viewed 1338 times

Attached sertificates

Cinema11_Screen1.zip

(50.5 KiB) Downloaded 108 times

[carl]

Hi, so you made the correct KDM in some other tool? And you're adding the 1190143602 ICP and LD as trusted devices?

[auta]

Yes, the correct KDM created in Clipster and easyDCP KDM Generator.
I tried to add the LD certificate but I get the error "Could not load certificate (Unexpected data certificate)"

I tried to add certificates in different ways, but I did not receive the necessary thumbprint

attemp_load_ld.PNG (82.76 KiB) Viewed 1287 times