Barco Sudden error appeared

Anything and everything to do with DCP-o-matic.
Post Reply
rehan
Posts: 1
Joined: Sat Jan 22, 2022 5:33 pm

Barco Sudden error appeared

Post by rehan »

Turned on a projector 1 week and suddenly this message appeared.

5817 : cp - no cinema processor (icp or icmp) detected
5830 : ti-link-decryptor - no communication
Attachments
1.jpeg
1.jpeg (245.69 KiB) Viewed 1148 times
WhatsApp Image 2022-01-22 at 10.36.51 PM.jpeg
WhatsApp Image 2022-01-22 at 10.36.51 PM.jpeg (245.69 KiB) Viewed 1150 times
carl
Site Admin
Posts: 2338
Joined: Thu Nov 14, 2013 2:53 pm

Re: Barco Sudden error appeared

Post by carl »

This kind of thing isn't really our speciality on this forum: someone might have an idea, but if not it might be worth posting over on Film-Tech.
Carsten
Posts: 2648
Joined: Tue Apr 15, 2014 9:11 pm
Location: Germany

Re: Barco Sudden error appeared

Post by Carsten »

Yup, try Film-Tech. This is either a dead ICP (the major processing board in your Barco projector), or it simply needs to be reseated within the card cage. You need special setup/installer passwords to clear upcoming tamper errors, so, don't try this alone. How old is this projector?

In rare cases, a shutdown/reboot will solve it, but you'd have to be lucky.
Post Reply