I've got a 16:9 film (3200x1800) which keeps appearing with pillar boxing as a DCP!
The similar discussion posts I've read so far seem to accept this as inevitable, and that 16:9 is not native to DCPs - is that the case? The manual also doesn't tackle this, that I've found. I've messed with the scaling (which seems to only add letter boxing) and the cropping (which crops more of the image, while I want none cropped). I feel there's something obvious eluding me. I'm a first time DCP maker, what is your more experienced take?
Attached are the pillar boxed picture and corresponding settings...
Pillar Boxing in 16:9 Ratio
-
- Posts: 1
- Joined: Fri Mar 01, 2024 5:51 pm
Pillar Boxing in 16:9 Ratio
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2665
- Joined: Tue Apr 15, 2014 9:11 pm
- Location: Germany
Re: Pillar Boxing in 16:9 Ratio
Cropping or pillarboxing are your only options for 16:9. Choose a 2k or 4k flat container.
- Carsten
- Carsten
-
- Posts: 84
- Joined: Mon Jan 17, 2022 5:13 pm
- Location: Montreal, Canada
Re: Pillar Boxing in 16:9 Ratio
The projector lens zoom has to be adjusted so as to put the black outside the visible screen.vinnie_pooh wrote: ↑Fri Mar 01, 2024 6:02 pm I've got a 16:9 film (3200x1800) which keeps appearing with pillar boxing as a DCP!
-
- Posts: 2665
- Joined: Tue Apr 15, 2014 9:11 pm
- Location: Germany
Re: Pillar Boxing in 16:9 Ratio
That will also move top and bottom outside the visible area, and is the same a cropping to a flat container.
-
- Posts: 84
- Joined: Mon Jan 17, 2022 5:13 pm
- Location: Montreal, Canada
Re: Pillar Boxing in 16:9 Ratio
OK, I should have said that on our fixed 16:9 screen, when 16:9 content is in a flat DCP, we zoom the projector so as to fit vertically, thus projecting the black pillars outside the 16:9 screen.
-
- Posts: 2665
- Joined: Tue Apr 15, 2014 9:11 pm
- Location: Germany
Re: Pillar Boxing in 16:9 Ratio
We have adjustable horizontal masking, basically, we can adjust to approx 10cm accuracy. So, whenever possible, we have all lens presets set to use the full height of the screen, then adjust the masking to fit the sides.
-
- Posts: 84
- Joined: Mon Jan 17, 2022 5:13 pm
- Location: Montreal, Canada
Re: Pillar Boxing in 16:9 Ratio
This is our fixed 16:9 screen. With Denis Villeneuve in front of it. ![Wink ;)](./images/smilies/icon_e_wink.gif)
![Image](https://actualites.uqam.ca/wp-content/uploads/2023/12/uqam-denis-villeneuve-2023benoit-rousseau-04765.jpg)
![Wink ;)](./images/smilies/icon_e_wink.gif)
![Image](https://actualites.uqam.ca/wp-content/uploads/2023/12/uqam-denis-villeneuve-2023benoit-rousseau-04765.jpg)