Version 2.13.120
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
- Suggest that DCP rates <= 30 are used unless the user explictly goes higher (#1441).
- Allow loading of OTF files.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Remove specification of italic/bold fonts (#1451); synthesis will be used instead.
- Fix incorrect subtitle positioning when there are simultaneous subtitles at the same vposition from different reference points (#1458).
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Fix non-translated file dialogues on OS X (#1261).
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
- Fix odd height reported by mediainfo (#1325).
- Check consistency of refer-to-DCP settings after adding content (#1456).
- Fix non-translated days of the week (#1455).
- Fix crash with some malformed .srt files (#1454).
- Don't enable the export OK button if we change format but have still not set an output file.
Thanks to our patron:
and subscribers:
Version 2.13.117
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
- Suggest that DCP rates <= 30 are used unless the user explictly goes higher (#1441).
- Allow loading of OTF files.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Remove specification of italic/bold fonts (#1451); synthesis will be used instead.
- Fix incorrect subtitle positioning when there are simultaneous subtitles at the same vposition from different reference points (#1458).
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Fix non-translated file dialogues on OS X (#1261).
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
- Fix odd height reported by mediainfo (#1325).
- Check consistency of refer-to-DCP settings after adding content (#1456).
- Fix non-translated days of the week (#1455).
- Fix crash with some malformed .srt files (#1454).
- Don't enable the export OK button if we change format but have still not set an output file.
Version 2.13.116
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
- Suggest that DCP rates <= 30 are used unless the user explictly goes higher (#1441).
- Allow loading of OTF files.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Remove specification of italic/bold fonts (#1451); synthesis will be used instead.
- Fix incorrect subtitle positioning when there are simultaneous subtitles at the same vposition from different reference points (#1458).
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Fix non-translated file dialogues on OS X (#1261).
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
- Fix odd height reported by mediainfo (#1325).
- Check consistency of refer-to-DCP settings after adding content (#1456).
- Fix non-translated days of the week (#1455).
- Fix crash with some malformed .srt files (#1454).
- Don't enable the export OK button if we change format but have still not set an output file.
Version 2.13.115
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
- Suggest that DCP rates <= 30 are used unless the user explictly goes higher (#1441).
- Allow loading of OTF files.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Remove specification of italic/bold fonts (#1451); synthesis will be used instead.
- Fix incorrect subtitle positioning when there are simultaneous subtitles at the same vposition from different reference points (#1458).
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Fix non-translated file dialogues on OS X (#1261).
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
- Fix odd height reported by mediainfo (#1325).
- Check consistency of refer-to-DCP settings after adding content (#1456).
- Fix non-translated days of the week (#1455).
- Fix crash with some malformed .srt files (#1454).
- Don't enable the export OK button if we change format but have still not set an output file.
Version 2.13.112
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
- Suggest that DCP rates <= 30 are used unless the user explictly goes higher (#1441).
- Allow loading of OTF files.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Remove specification of italic/bold fonts (#1451); synthesis will be used instead.
- Fix incorrect subtitle positioning when there are simultaneous subtitles at the same vposition from different reference points (#1458).
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Fix non-translated file dialogues on OS X (#1261).
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
- Fix odd height reported by mediainfo (#1325).
- Check consistency of refer-to-DCP settings after adding content (#1456).
- Fix non-translated days of the week (#1455).
- Fix crash with some malformed .srt files (#1454).
- Don't enable the export OK button if we change format but have still not set an output file.
Version 2.13.111
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
- Suggest that DCP rates <= 30 are used unless the user explictly goes higher (#1441).
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Remove specification of italic/bold fonts (#1451); synthesis will be used instead.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Fix non-translated file dialogues on OS X (#1261).
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
Version 2.13.110
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
- Suggest that DCP rates <= 30 are used unless the user explictly goes higher (#1441).
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Remove specification of italic/bold fonts (#1451); synthesis will be used instead.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Fix non-translated file dialogues on OS X (#1261).
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
Version 2.13.109
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
Version 2.13.108
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
Version 2.13.107
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure of SMPTE DCPs to validate on Sony systems (#978).
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
- Hide
U+202B
characters in subtitles.
Version 2.13.105
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
Version 2.13.104
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e and 3D support to
dcpomatic_create
.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
Version 2.13.102
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e to dcpomatic_create.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
Version 2.13.101
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
- Add --encrypted/-e to dcpomatic_create.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
Version 2.13.99
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
- Fix Gb -> GB confusion (thanks Rob van Nieuwkerk).
- Check available disk space when adding jobs to the batch converter (#1249).
Version 2.13.98
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
- Add File->Close to main DCP-o-matic (#1180).
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
Version 2.13.97
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
- Allow dragging of the border between the content list and the content setting tabs.
- Hopefully improve layout on high-resolution displays (#1303).
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
- Re-analyse audio when DCP channel count changes (#1189).
- Make sure audio analysis is re-run even if there's an existing job for the same playlist (but with different settings) (#1257).
Version 2.13.95
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix various errors in formatting of SMPTE subtitles.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Don't write tags to SMPTE subs unless we know the language, as ‘Unknown’ is an invalid value and <Language> is optional in SMPTE.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
- Fix strange behaviour with single-frame fades (#1440).
Version 2.13.94
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Only make 48kHz-audio DCPs for now (#1436).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Fix failure to re-create config when it is bad (due to attempt to find a link in the bad file).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
Version 2.13.89
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
Version 2.13.83
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
- Accept chains in files passed to dcpomatic2_kdm_cli as well as individual certificates.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
Version 2.13.82
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Support in-place translation updates.
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
Version 2.13.81
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
Version 2.13.78
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Fix 5.1 channel mapping when playing back on Linux.
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
Version 2.13.72
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Export 3D projects to separate left/right files (#1332).
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Fix multi-channel audio playback on Linux.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
- Increase maximum crop to 4096 (#1401).
Version 2.13.70
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
Version 2.13.68
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Add button to force re-encode of J2K content.
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
- Allow specification of trusted devices by thumbprint rather than by full certificate.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
Version 2.13.67
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
Version 2.13.66
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Some optimisation of the player to improve its frame rate.
- Export of multi-reel projects to multiple files (#1146).
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
Version 2.13.64
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Export of multi-reel projects to multiple files (#1146).
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).
Version 2.13.63
This release has the following changes:
Translation updates
- Updated zh_CN translation from 刘汉源.
- Updated nl_NL translation from Rob van Nieuwkerk.
- Updated fr_FR translation from Thierry Journet.
- Updated de_DE translation from Carsten Kurz.
- Updated cs_CZ translation from Tomáš Begeni.
- Updated it_IT translation from Felice D'Andrea and Riccardo Mantani.
- Updated ru_RU and uk_UA translations from Igor Voytovich.
New features
- Closed captioning.
- Bitmapped (PNG timed-text) subtitles.
- Optional "simple" mode with a cut-down GUI.
- Add some key short-cuts: arrows to go forward/backward one frame, Ctrl-T to open timeline, space to start/stop playback (#1201).
- Enhanced timeline view with zoom, scrolling and more details displayed about audio content (#1279).
- Option to set the quality (and hence size) of exported H264 files.
- Full-screen mode for the player (#1329).
- Add time axis and real-time readout of time and level in the audio analysis window (#1082).
- Jump to the selected subtitle in the preview if ‘jump to selected content’ is ticked (#1200).
- Allow selection of CPL in the player (#1239).
- Export of multi-reel projects to multiple files (#1146).
- Modify output XML namespacing to pass checks run by certain UK distribution companies.
- Note and indicate servers with bad link version (#982).
- Allow command-line configuration of config location (#1284).
- Add cancel button to player progress (#1294).
- Add pause/resume to the batch converter (#1248).
- Allow KDM download from Christie, Barco and GDC.
- Allow dialogue box and email notifications when jobs finish (#1286).
- Add option to open a DCP in the player (#1312).
- Add options to enable or disable forensic marking flags in KDMs.
- Give better errors when incorrect KDMs are used (#1326).
- Select CPL by name in the player (#1357).
- Add export button for cinemas XML (#1319).
- Add advanced configuration option to allow any container ratio, specifically because the GDC SX-2001 will only play 25fps DCPs with a 16:9 ratio (not Flat).
- Flatpak and AppImage builds.
Bug fixes
- Fix assertion failure when using separate left/right 3D content (#1264).
- Fix failure to load files with non-ASCII filenames into ImageMagick.
- Keep bitmapped subtitles centered when they are scaled (#1246).
- Speculative fix for crash on startup with no audio devices (#1265).
- Prevent setting of negative trims by changing play length.
- A range of fixes for crashes and misbehaviour when changing things during playback.
- Check content files for changes on loading projects and before making DCPs.
- Fix missing start icon for the player in Linux.
- Fix some video content appearing upside down.
- Fix crash with missing DCP content.
- Fix doubled-up subtitles in some cases.
- Fix corruption of UTF16 subtitle files.
- Tidying up of scrolling in the matrix view.
- Keep content in direct sequence when it is trimmed if the ‘sequence’ tool is enabled (#1327).
- Modify the downmix mapping so that we include Ls, Rs and Lfe (#1281).
- Fix failure to download some certificates (#1379).
- Update encoding server list when servers disappear (#1176).
- Fix default colour of subtitle effects.
- Disable OK in export dialogue until a filename has been specified (#1260).
- Big speed up when handling start-trims.
- Assume .jpf is an image (JPEG2000).
- Fix some warnings about trims not being on frame boundaries.
- Fix hangs when making very long DCPs of still frames (#1317).
- Various fixes to ru_RU DCI names.
- Fix crash on make-dcp after trimming end of text subtitles (#1275).
- Fix incorrect container size when loading a Scope VF/OV combination into the player.
- Force remake of video when subtitle colours and/or effect change (#1290).
- Fix crash on enabling telecine filter.
- Fix incorrect subtitle timing when there are several reels without subtitles.
- Fix overlaid text in, for example, lines with partial italic.
- Fix disappearing subtitles containing &
- Try to disable sub-pixel anti-aliasing (aka ‘ClearType’) when rendering subtitles.
- Various fixes for crashes when dragging content while playing.
- Save config changes made through the batch converter.
- Prevent FFmpeg errors if export filenames are specified with no or incorrect extensions.
- Don't write multiple tags to Interop subtitles (#1273).
- Fix ordering of image filenames in cases where there are lots of digits in the names.
- Disable the whole interface during audio analysis (#1278).
- Fix console noise when importing non-DCP MXFs (#1362).
- Fix crash when importing DCP with multiple PKLs.
- Fix missing subrip subtitle colours when using upper-case tags.
- Prevent un-prompted overwrite of files when exporting things from config (#1383).
- Add some default filenames when exporting keys (#1383).