CANNOT reference this DCP it is smpte and the film is set to interop
I want to make KDM for others and I can't do it now
Automatic shutdown after error
-
carl
- Site Admin
- Posts: 2550
- Joined: Thu Nov 14, 2013 2:53 pm
Re: Automatic shutdown after error
What did you do just before that error occurred?
-
bnm14777
- Posts: 40
- Joined: Fri Jun 08, 2018 8:12 am
Re: Automatic shutdown after error
Open the original project file This error occurs
-
carl
- Site Admin
- Posts: 2550
- Joined: Thu Nov 14, 2013 2:53 pm
Re: Automatic shutdown after error
Can you send the "metadata.xml" file from your project to carl@dcpomatic.com ?
-
bnm14777
- Posts: 40
- Joined: Fri Jun 08, 2018 8:12 am
Re: Automatic shutdown after error
Has been sent, the pro check
-
bnm14777
- Posts: 40
- Joined: Fri Jun 08, 2018 8:12 am
Re: Automatic shutdown after error
There is also a question why the program will automatically close after an error, there is no way to adjust or modify the error parameters
-
Carsten
- Posts: 2804
- Joined: Tue Apr 15, 2014 9:11 pm
- Location: Germany
Re: Automatic shutdown after error
The 'CANNOT reference this DCP it is smpte and the film is set to interop' is probably irrelevant in this case, it is not the cause of your error. From what I see, you are trying to open a project that used a DCP as source media, that is no longer available (or it's location has changed). Can you remember which version of DCP-o-matic was used to create that project?
- Carsten
- Carsten
Last edited by Carsten on Fri Jun 08, 2018 1:35 pm, edited 2 times in total.
-
carl
- Site Admin
- Posts: 2550
- Joined: Thu Nov 14, 2013 2:53 pm
Re: Automatic shutdown after error
There is a bug in 2.13.26 which causes an error on loading a project with missing DCP content, 2.13.27 will be up shortly.
-
bnm14777
- Posts: 40
- Joined: Fri Jun 08, 2018 8:12 am
Re: Automatic shutdown after error
DCP-o-matic 2.13.23 create